|
|
 |
NEW DESIGN Double opening front with 6 inner rooms and laser engraved front. Simple push together construction. Made from 1.5 & 3 mm ply and pine. 80 x 30 x 60 mm high. (3 1/8 x 1 3/16 x 2 1/2")
|
|
This delightful wooden Noah's Ark comes complete with 14 animals and Mr & Mrs Noah. The kit is fully pre-cut. It is a simple job to glue the 3 pieces of the hull together and to fit the cabin to the top. The finished ark can be left in its natural wood finish or painted. The ark can also be supplied completed and painted. 60 x 23 x 28 mm. (2 1/2 x 7/8 x 1 3/8")
|
|
The fully pre-cut wooden parts simply push together to form this castle with a working portcullis. 45 x 45 x 25 mm. (1 3/4 x 1 3/4 x 1")
|
|
Miniature picture puzzles only 32 x 23 mm cut into 24 perfect interlocking pieces. See the Puzzlets page in the Advanced Puzzles section.
|
|
|
|
|
Mahogany with cabriole legs, decorative back splat and applied carvings. Available as single chairs, chairs with arms or a matched set of six, including two with optional arms. 50 x 40 x 85 mm high. (2 x 1 3/8 x 3 3/8")
|
|
Mahogany with cabriole legs and decorative fretted back splat. Available as single chairs, chairs with arms or a matched set of six, including two with optional arms. 50 x 40 x 85 mm high. (2 x 1 3/8 x 3 3/8")
|
|
Mahogany with cabriole legs and decorative fretted back splat. Matches MBK.106 dining chair. 95 x 40 x 85 mm high. (3 3/4 x 1 3/8 x 3 3/8")
|
|
A very straightforward kit in mahogany with cabriole legs. Top 35 x 30 x 23 mm high. (1 3/8 x 1 1/8 x 7/8")
|
|
A simple kit which makes an elegant mahogany dining table on a central pedestal with three splayed legs. Seats 4. 90 mm diameter x 63 mm high. (3 1/2 dia x 2 1/2")
|
|
In mahogany with cabriole legs, c.George III. A simple rectangular sub frame attackes the 4 legs to the pre-moulded top. Available in three sizes to seat 4, 6 or 8 chairs, all 63 mm high and 85 mm wide. (2 1/2 x 3 1/4") 4 seater 155mm (6 1/8") 6 seater 180mm (7 1/8") 8 seater 210mm (8 1/4")
|
|
In mahogany, c.George III. A simple rectangular frame attaches the four cabriole legs to the pre-moulded top. Seats 6. 165 x 85 x 65 mm high. (6 1/2 x 3 3/8 x 2 1/2")
|
|
Mahogany with twin turned columns each with three splayed legs, c.George III. A straightforward kit with all parts pre-shaped and moulded. brass castors can be added if you wish. Will seat 4, 6 or 8 chairs. 150 extending to 200 x 90 x 60 mm high. (6-7 3/4 x 3 1/2 x 2 3/8")
|
|
c. 1750. Made from mahogany with a central pedistal and three ornate splayedn legs and a fluted edge All parts are preshaped and carved Top 60 mm diameter x 65 mm high.(2 3/8 dia x 2 1/2")
|
|
Styled after a table at Clarendon Park, Surrey c.1750. Made from mahogany with a central pedestal and three ornate splayed legs, a fluted edge and optional central carved recess. All parts are pre-shaped and carved. Top 60 mm diameter x 65 mm high. (2 3/8 dia x 2 1/2")
|
|
After the style of Hepplewhite, c.1790. In mahogany with square tapered legs and a bow front. The two deep and one shallow drawers all feature comb joined back and sides, an inset base and curved fronts. (Please note that the kit does not include drawer handles). Although a more complex kit the assembly is straightforward with the inner carcass and drawers being pre-jointed needing only pushing together. 95 x 45 x 80 mm high. (3 3/4 x 1 3/4 x 3 1/8")
|
|
After the style of Hepplewhite, c.1790. In mahogany with square tapered legs and a bow front. This table is designed to match the small bow fronted sideboard 95 x 45 x 80 mm high. (3 3/4 x 1 3/4 x 3 1/8")
|
|
|
|
|
Mahogany ornate bed with "rope" bases, full tester style. Size: 190 x 150 x 205 mm high (7 1/2 x 6 x 8")
|
|
Mahogany ornate bed with "rope" bases, half tester style. Available in 2 heights 190 x 150 x 245 mm to top of emblem, this may be omitted reducing the height to 225 mm (7½ x 6 x 9 5/8” high [8 7/8” without emblem] ) Or 225 to top of emblem, this may be omitted reducing the height to 205 mm
|
|
Mahogany ornate bed with "rope" bases, Pillar style. Size: 190 x 150 x 120 mm high (7 1/2 x 6 x 4 3/4")
|
|
Available either lined with red felt or fully fitted as a duelling pistol case, cutlery or jewellery box. Comb joined corners and brass hinges. The kits feature a unique "break away" lid, making it easy to construct a well fitting, square box and lid. 45 x 30 x 15 mm (1 3/4 x 1 1/8 x 9/16")
|
|
Similar to our boxes but cut to an angle to reveal a writing slope when the box is opened. The slope can be removed to give access to a storage area for paper and has a mahogany fitted tray for pens etc. Comb jointed corners and brass hinges 45 x 30 x 22 mm (1 3/4 x 1 1/8 x 7/8")
|
|
|
|
|
Available in kit form or completed, separate units or a matched set, late George III bureau with glazed bookcase, with comb jointed Mahogany carcase and Beech drawers (kit excludes hinges and handles).
|
|
Available in two sizes; medium, equivalent to a 3' width and large, equivalent to a 4'6'' width. A straightfoward kit in mahogany with moulded side panels and pediment. They can be placed adjacent to each other to make a larger unit. medium bookcase 85 x 35 x 190mm high (3 3/8 x 1 1/4 x 7 5/8") Large bookcase 120 x 35 x 190mm high (4 7/8 x 1 1/4 x 7 5/8")
|
|
|
|
|
Mahogany sign boards and individual MDF characters which can be painted, guilded or stained to make any sign. Available in three font styles either plain MDF or painted with a "gold leaf", "antique gold" or "antique silver" finish. Available in: Roman (top) 15mm (5/8") Algerian (middle) 14mm (9/16") Copper plate (bottom) 10mm (7/16") £1.00 per letter plain MDF £2.00 per letter painted please phone or write to order, see Contact Us for more details
|
|
|
|
|
The Lutyens bench is available in cherry, spruce or MDF for painting. 158 x 50 x 95 mm high. (6 1/4 x 2 x 3 5/8")
|
|
a set of three wall pannels with Trompe l'oeil styling, 90 x 180mm (7 x 3 1/2")
|
|
a double gate with two piers either trellised or solid. Piers mesure25 x 25 x 160 (1 x 1 x 6 1/4") Gates measure 180 x 190mm tall (7 1/8 x 7 1/2")
|
|
a single gate with two piers either trellised or solid. Piers mesure25 x 25 x 160 (1 x 1 x 6 1/4") Gate measures 90 x 190mm tall (3 1/2 x 7 1/2")
|
|
square trellis collection
|
|
comes in a set of two 25 x 25 x 160mm (1 x 1 x6 1/4")
|
|
quadrant of radius 80mm (3 1/8") supplied without pier
|
|
90 x 150mm (3 1/2 x 6") supplied without piers
|
|
150 x 150mm (6 x 6") supplied without piers
|
|
Trompe l'oeil trellis collection
|
|
|
|
|
|
|
|
for painting, cladding etc.
|
|
comes in a set of 2 to fit low walls
|
|
comes in set of 2 to fit tall walls 25 x 25 x 160 (1 x 1 x 6 1/4")
|
|
90 x 85mm (3 1/2 x 3 1/4") supplied without piers
|
|
150 x 85mm (6 x 3 1/4") supplied without piers
|
|
90 x 150mm (3 1/2 x 6") supplied without piers
|
|
150 x 150mm (6 x 6") supplied without piers
|
|
Made from MDF with acrylic glazing, featuring inner and outer glazing bars, double opening doors, decorative ridge and an easy, slot together construction. Available in 2 bay, 175 x 220 x 290 mm high (6 7/8 x 8 3/4 x 11 3/8") or 3 bay, 250 x 220 x 290 mm. (9 3/4 x 8 3/4 x 11 3/8")
|
|
Made from MDF with acrylic glazing, featuring inner and outer glazing bars, double opening doors, decorative ridge and an easy, slot together construction. Available in 2 bay, 175 x 220 x 290 mm high (6 7/8 x 8 3/4 x 11 3/8") or 3 bay, 250 x 220 x 290 mm. (9 3/4 x 8 3/4 x 11 3/8")
|
|
